The guy hook Made up of hot-dip galvanized known as ram heads or bear claws to meet the Specification of ATSM A153，which is designed for use on ground surfaces, whose 45 degrees ultimate tensile strength of 21,000 lbs. and Guy hook provides a systematic and reasonable means of securing guys to poles and is used to break off guy wires or fiberglass guy strain insulators.
The cast ductile guy-hook attachment for deadening guy wire, with a minimum tensile strength of about 10,000 lbs.
Guy hook provides an economical means of fastening guys to poles, and put an end to guy wires.
Guy hook specification
| Part No. | Type | Width Across Hooks | Base Width | Overall Length | Mounting Hole Dia. | Thickness | Lower Hole Dia. |
| A | B | C | D | E | F | ||
| D135N | 1 | 3.63” | 2.50M | 4.75” | 0.69” | 1.62″ | 0.56” |
| D135ILS | 2 | 3.63” | 2.50* | 4.75” | 0.69” | 2.25″ | Integral Lag Spur |
| D136N | 1 | 3.63” | 2.5W | 4.87″ | 0.81” | 1.73” | 0.56” |
| D136ILS | 2 | 3.63” | 2.5″ | 4.87” | 0.81” | 2.25” | Integral Lag Spur |
